| 序号 |
题名 |
刊名 |
作者 |
| 1 |
Experimental and DEM studies on the transition of axial segregation in a truck mixer |
POWDER TECHNOLOGY |
邓熔，谭援强，张浩，肖湘武，姜胜强 |
| 2 |
Experimental and numerical investigation on galling behavior in sheet metal forming process |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
董文正，徐令，林启权，王志刚 |
| 3 |
Analysis of Static and Dynamic Characteristic of Spindle System and its Structure Optimization in Camshaft Grinding Machine |
GREEN ENERGY AND SUSTAINABLE DEVELOPMENT I |
冯剑军,李成喆,武智 |
| 4 |
Intrinsic cohesive modeling of impact fracture behavior of laminated glass |
MATERIALS & DESIGN |
高伟，向纪邦，陈顺华，尹硕辉，臧孟炎，郑学军 |
| 5 |
Signal analysis of magnetic control SAW seam tracking based on the empirical wavelet transform |
Hanjie Xuebao |
洪波, 戴江平, 李振凯, 王谦 |
| 6 |
Method of optimizing magnetic-control arc welding sensor parameters based on Kriging surrogate model |
Hanjie Xuebao |
洪波, 李振凯, 柳健, 戴江平 |
| 7 |
Prediction in longeron automatic welding of generalized regression neural network by ameliorated fruit flies optimization algorithm |
Hanjie Xuebao |
洪波, 刘龙, 王涛 |
| 8 |
Analysis of mechanical properties and microstructure of flux-cored wire for railway transportation equipment steel |
Hanjie Xuebao |
洪波，张明华，尹付成 |
| 9 |
Dynamics analysis of the pitch control reducer for MW wind turbine |
JOURNAL OF VIBROENGINEERING |
胡聪芳，沈成功，彭锐涛，陈睿 |
| 10 |
Discrete element simulation of SiC ceramic with pre-existing random flaws under uniaxial compression |
CERAMICS INTERNATIONAL |
姜胜强，黎旭，谭援强，刘浩瀚，徐志强，陈睿 |
| 11 |
A seam-tracking system based on variable-area-typed dual eddy current sensor |
Hanjie Xuebao |
李湘文；唐明；洪波；廖亚华 |
| 12 |
A swing-type seam-tracking sensor with adjacent capacitances for overlap of sheet |
Hanjie Xuebao |
李湘文；陶韬；洪波；曹源源 |
| 13 |
Analysis of Temperature Field in the Flow Field and the Stress Field of the Friction Plate of the Wet Clutch |
PROCEEDINGS OF THE 2ND INTERNATIONAL CONFERENCE ON MECHATRONICS ENGINEERING AND INFORMATION TECHNOLOGY (ICMEIT 2017) |
刘金刚，牟明 ，陈建文，李泉 |
| 14 |
Preparation and tribological properties of dual self-assembled monolayers/ionic liquids composite lubricating films |
Mocaxue Xuebao |
刘思思，张言，童佳威 |
| 15 |
Study on hot deformation behavior and intrinsic workability of 6063 aluminum alloys using 3D processing map |
JOURNAL OF ALLOYS AND COMPOUNDS |
刘洋、耿聪、林启权、肖逸锋、徐俊瑞、康巍 |
| 16 |
Effect of Sr addition on microstructure evolution and mechanical properties of Zn-4%Al hypoeutectic alloy |
JOURNAL OF ALLOYS AND COMPOUNDS |
刘洋、耿聪、朱云柯、陈旭 |
| 17 |
Hot Deformation Behavior and Intrinsic Workability of Carbon Nanotube-Aluminum Reinforced ZA27 Composites |
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE |
刘洋、耿聪、朱云柯、彭金峰、徐俊瑞 |
| 18 |
Development and Grinding Performance of a Pressurized Internal Cooling Slotted Grinding Wheel |
Jixie Gongcheng Xuebao |
彭锐涛、张珊、唐新姿、陈睿、周专 |
| 19 |
An analytical model to calculate the peak temperature for friction stir welding |
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING |
钱锦文、欧艳、李京龙、肖逸锋、许艳飞、吴靓 |
| 20 |
Effect of Silicon on M7C3Phases and Abrasion Resistance of Open Arc Hardfacing Alloys |
Cailiao Gongcheng |
田兵，龚建勋,刘江晴，吴慧剑 |
| 21 |
Performance comparison and analysis of a combined power and cooling system based on organic Rankine cycle |
JOURNAL OF CENTRAL SOUTH UNIVERSITY |
王志奇，周奇遇，夏小霞 |
| 22 |
Electrocatalytic activity of porous Ni-Fe-Mo-C-LaNi5 sintered electrodes for hydrogen evolution reaction in alkaline solution |
RSC ADVANCES |
吴靓，郭小花，徐阳，肖逸锋，钱锦文，许艳飞，管卓，贺跃辉，曾毅 |
| 23 |
Experimental and DEM studies on the particle mixing performance in rotating drums: Effect of area ratio |
POWDER TECHNOLOGY |
肖湘武，谭援强，张浩，邓熔，姜胜强 |
| 24 |
Fabrication and high temperature oxidation resistance of porous Ni-Cr-Fe alloys |
Zhongguo Youse Jinshu Xuebao |
肖逸锋，刘艳，汤智，吴靓，许艳飞，钱锦文，贺跃辉 |
| 25 |
Tensile behavior and microstructural evolution for AZ31 magnesium alloys sheet at high strain rate |
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH |
徐俊瑞，苏继爱,崔俊佳,刘洋,张旭,孙光勇 |
| 26 |
Experimental study for rubber pad forming process of AZ31 magnesium alloy sheets at warm temperature |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
徐俊瑞，周颖奇,崔俊佳,孙光勇,李光耀 |
| 27 |
External remote field eddy current probe for defect detection at pipe elbows |
Yi Qi Yi Biao Xue Bao |
徐志远，林章鹏，袁湘民，林稳
|
| 28 |
Finite volume analysis the thermal behavior of electrode non-uniformity |
HEAT AND MASS TRANSFER |
叶为标 |
| 29 |
Enhanced latent heat thermal energy storage in the double tubes using fins |
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY |
叶为标 |
| 30 |
Design method and modeling verification for the uniform air flow distribution in the duct ventilation |
APPLIED THERMAL ENGINEERING |
叶为标 |
| 31 |
Rotation-free isogeometric analysis of functionally graded thin plates considering in-plane material inhomogeneity |
THIN-WALLED STRUCTURES |
尹硕辉，余天堂，Bui, Tinh Quoc，郑学军，易高 |
| 32 |
Scratching of SiC ceramics at two dimensional pre-stressing |
Int. J. Nanomanufacturing |
张高峰，曾忆江，张文博 |
| 33 |
Transient heat transfer analysis of anisotropic material by using Element-Free Galerkin method |
INTERNATIONAL COMMUNICATIONS IN HEAT AND MASS TRANSFER |
张建平，周国强，龚曙光，王树森 |
| 34 |
Steady heat transfer analysis of orthotropic structure based on Element-Free Galerkin method |
INTERNATIONAL JOURNAL OF THERMAL SCIENCES |
张建平，周国强，龚曙光，王树森，胡胜 |
| 35 |
The influence factors of shrink-fit tool holder clamping temperature |
Jixie Gongcheng Xuebao |
周后明，刘博，张高峰，周友行，彭锐涛 |
| 36 |
Consistency evaluation of hole series surface quality using vibration signal |
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY |
周友行，杨文佳，徐志远，石弦伟 |
| 37 |
基于耦合机制的宽温度自润滑陶瓷刀具材料 |
材料科学与工程学报 |
周后明, 赵振宇, 罗文懿, 刘新乾 |
| 38 |
铝合金实心凸起结构板锻造成形工艺 |
中国有色金属学报 |
董文正, 张存园, 林启权, 王志刚 |
| 39 |
基于经验小波变换的磁控埋弧焊焊缝跟踪信号分析 |
焊接学报 |
洪波, 戴江平, 李振凯, 王谦 |
| 40 |
基于Kriging 代理模型的磁控电弧传感器参数优化方法 |
焊接学报 |
洪波, 李振凯, 柳健, 戴江平 |
| 41 |
修正型果蝇算法优化GRNN的大梁自动焊障碍预测 |
焊接学报 |
洪波, 刘龙, 王涛 |
| 42 |
一种基于三维空间的焊缝跟踪精度评价分析方法 |
焊接学报 |
洪波, 卢文召, 汤小虎, 李高阳 |
| 43 |
窄间隙CO_2气体保护焊的磁控焊缝跟踪方法 |
焊接学报 |
洪波, 易世洪, 庞争林, 李文强 |
| 44 |
基于激光位移传感器的角焊缝位姿检测 |
中国机械工程 |
洪波, 尹力, 李毅, 李湘文 |
| 45 |
非规则泥沙颗粒流动堆积过程中接触模型参数研究 |
泥沙研究 |
姜胜强, 谭磁安, 陈睿, 谭援强 |
| 46 |
径向磁轴承磁路耦合对磁力的影响及其解耦控制策略 |
中国机械工程 |
景轩，谭援强，朱杰 |
| 47 |
用平台巴西圆盘实验确定金属粉末压坯的力学性能参数 |
材料科学与工程学报 |
林启权, 杨辅, 董文正, 吉淼 |
| 48 |
平面机构运动输出精度可靠性及寿命 |
机械科学与技术 |
刘柏希, 屈涛, 张弦 |
| 49 |
Ti对明弧高硼堆焊合金显微组织及耐磨性的影响 |
金属热处理 |
龚建勋, 张立成 |
| 50 |
抑制管片拼装机起步冲击的模糊控制算法研究 |
机械科学与技术 |
刘金刚, 王凯, 廖金军 |
| 51 |
抛光垫特性对硬质合金刀片CMP加工效果的影响 |
表面技术 |
毛美姣, 吴锋, 胡自化 |
| 52 |
内插螺旋线强化糖浆立式降膜蒸发传热 |
过程工程学报 |
彭德其, 陈兰伟, 罗海松, 俞天兰, 陈康, 李昊, 韩玉叶 |
| 53 |
含固体颗粒流体旋流场强化传热综合性能实验 |
化学工程 |
彭德其, 罗海松, 俞天兰, 陈兰伟, 吴淑英, 韩玉叶 |
| 54 |
加压内冷却方法在高温合金磨削中的应用 |
中国机械工程 |
彭锐涛, 李仲平, 黄晓芳, 唐新姿, 胡云波 |
| 55 |
双轴桨叶式干燥机气固两相流的数值模拟 |
有色金属工程 |
胡自化, 张荣, 陈小告, 方涛 |
| 56 |
旋流数对燃烧不稳定性及NO_x生成的影响 |
动力工程学报 |
石黎, 付忠广, 王瑞欣, 沈亚洲 |
| 57 |
考虑层流分离的低速风力机翼型气动性能研究 |
动力工程学报 |
唐新姿, 黄轩晴, 孙松峰, 彭锐涛 |
| 58 |
08A1钢二阶梯圆筒件的拉深次数预测 |
塑性工程学报 |
肖良红, 林叶芳, 李建文, 王欢 |
| 59 |
真空烧结熔覆Ni60涂层的组织和性能 |
金属热处理 |
肖逸锋, 曾凡检, 匡雯慧, 吴靓, 许艳飞, 钱锦文, 贺跃辉 |
| 60 |
真空烧结反应合成WC铁基耐磨材料的组织与性能 |
材料热处理学报 |
肖逸锋, 杨燕, 龚伟伟, 吴靓, 许艳飞, 钱锦文, 贺跃辉 |
| 61 |
硬质相成分对WC-TiC钢结硬质合金组织及力学性能的影响 |
材料热处理学报 |
肖逸锋, 周年丰, 匡雯慧, 吴靓, 许艳飞, 钱锦文, 贺跃辉 |
| 62 |
Cr 含量对WC 钢结硬质合金组织及力学性能的影响 |
金属热处理 |
肖逸锋, 周年丰, 吴靓, 许艳飞, 钱锦文, 李浪浪, 贺跃辉 |
| 63 |
分解窑混煤富氧燃烧研究 |
中南大学学报 自然科学版 |
徐顺生, 杨易霖, 时章明, 刘飞虹, 武浩, 肖逸奇, 黄碧漪, |
| 64 |
可控柔性表面抛光研究综述 |
表面技术 |
徐志强, 王秋良, 张高峰, 朱科军, 姜胜强 |
| 65 |
低温轧制对生物医用Ti-25Nb-10Ta-1Zr-0,2Fe合金组织和性能的影响 |
材料热处理学报 |
许艳飞, 王章, 肖逸锋, 文璟, 阳文豪，易丹青，刘会群，吴靓, 钱锦文 |
| 66 |
TC4 /TC18异种钛合金焊接头的组织性能研究及数值模拟 |
金属热处理 |
许艳飞, 文璟, 肖逸锋, 王章, 吴靓, 钱锦文 |
| 67 |
基于定向距离理论的五轴加工刀具轨迹规划算法 |
中国机械工程 |
尹业熙,周后明, 秦衡峰, |
| 68 |
发动机复合材料连杆传热的无网格模型与应用 |
机械科学与技术 |
周国强, 张建平, 龚曙光, 胡胜 |
| 69 |
MoS_2基固体润滑剂微织构自润滑刀具切削性能的研究 |
机械科学与技术 |
周后明, 罗文懿, 龙远强, 张高峰, 周友行 |
| 70 |
基于离散元法的沥青混凝土振动切削过程的数值模拟 |
机械工程学报 |
周里群, 许欣, 关汗青, 宋广衡, 李玉平 |
| 71 |
基于弧长参数的Akima刀位轨迹拟合算法研究 |
中国机械工程 |
吴继春, 周会成, 杨世平, 刘金刚, 马秋成 |
| 72 |
钝体阶梯扩管型微燃烧器内氢气–空气燃烧特性及协同性分析 |
中南大学学报 自然科学版 |
左青松, 朱鑫宁, 张建平, 王志奇, 张彬 |
| 73 |
耦合GPU与PCG的EFG法并行计算及应用研究 |
应用力学学报 |
龚曙光, 廖宇犁, 刘奇良, 张建平, 卢海山 |
